As all you know, we have many adafruit libraries allocated at biicode, including the one to handle the PCA9685, capable of moving up to 16 servos. Also You can find the nunchuck library, that allows to use nunchucky. That’s all the software you need to move some servos using a joystick.
A really quick and small project with temboo and arduino, comes in today.
We’re just using this HW components:
A new small project with arduino and temboo, comes in today. We’re just using this hardware:
In order to get the news on your email with Arduino, we are going to use temboo service. Continue reading
Today’s biiday comes in to prove that you can easily make anything you can imagine! This is the first one of a set of three posts in which temboo services are used with:
- Get a tweet of your timeline whenever you shake your Arduino. (today’s project)
- Get the New York Times news directly on your email. (tomorrow post)
- How many clicks does my bitly link get? (available on friday)
The layout below has been made for an Arduino mega2560, to use twitter with your Arduino. Continue reading
What’s this biiday project about? Get your Arduino to call you whenever the temperature rises!
In this case, we’re going to make our Arduino board call a phone based on the temperature value obtained from the 10-DOF IMU Breakout module, and then remotely control it with the keypad.
To connect to temboo, we’re using the Adafruit CC300 WiFi Module and reusing code from diego/ardunet.
What is this biiday project about?
Take your Arduino to filling real data from you home to any SpreadSheet in your Google Drive account, in this case with some values obtained from the 10-DOF IMU Breakout module : pitch, roll, altitude, pressure and temperature.
Our code, reuses from the diego/ardunet block in order to connect us with the CC3000 WiFi module.
And the new Ardunet block with SpreadSheet service for Arduino has the functions to achieve the data filling. The following layout was made for an Arduino Mega 2560:
If you have calibrated your TFT & RA8875 Driver, you’ll be able to use this post without any trouble.
If you haven’t calibrated your TFT yet, look our last post where we explained how to achieve it.
This example creates a button panel on the left side of your TFT.
Each Wednesday here, projects made with biicode!
Premiering our first biiday, one of biicontest’s participant projects.
Take a look at this Arduino GPS tracker!
Athena, the global car tracking system.
It’s developer named it ‘Athena’ because Athena is the Greek Goddess of navigation.
Wanna try it?
Today, you can learn how to save the calibration matrix in your EEPROM and load it any time you use your TFT Display.
Everytime you use the TFT Display you have to calibrate it for drawing anything properly. We can use the Arduino EEPROM to save the TFT Display calibration matrix and then use it anytime you want easier than ever before.